Whip Mix Pro Press 100 Operator's Manual download pdf (Page 2)

ProPress SP Furnace Operations Manual

Warranty

United States and Canada

Whip Mix Corporation warrants the ProPress SP to the

original purchaser against defective workmanship and

materials under normal procedures of installation, use and

service within the dental profession, for a period of three

years or 3750 mufﬂe hours, whichever occurs ﬁrst. During

which time Whip Mix Corporation will replace, repair or

deny warranty coverage at its discretion. Heat treating

refractory materials, misuse, improper installation, improper

maintenance, accident or abuse will void the warranty.

Whip Mix coverage only applies to Whip Mix supplied

parts, and repairs performed by Whip Mix certiﬁed repair

technicians. Repairs performed during the warranty period

do not extend the warranty period. Shipping damage is only

covered from Whip Mix to the intended recipient.

International

Two years parts and labor from date of purchase from dealer.

Intended Use:

The ProPress SP furnace is only intended for the ﬁring of

dental porcelain materials or the pneumatic pressing of

molten porcelain materials into lost wax investment molds.

If this furnace is not used in a manner speciﬁed by the Whip

Mix Corporation, the protection provided by the product

might be impaired.

Recommendations

Note: During shipping the mufﬂe might absorb moisture

from the air. So, it is recommended you heat the mufﬂe

to dry the moisture before ﬁring any porcelain. To dry the

mufﬂe, set the idle temperature to 400° C (752° F) for one

hour and 600° C (1112° F) for one hour with the ﬁring tray in

place and the table left open.

Follow the numbered instructions on page 10 to set the idle

temperature to the temperatures mentioned above. Whip

Mix recommends leaving the furnace on at all times.

Turning the furnace off overnight may cause damage to

the mufﬂe, contamination and void the warranty.

Leaving your furnace on will also extend the life of your

furnace. See Night Mode, page 10 for further information.

Warnings

DO NOT OPERATE THIS FURNACE WITH ANY OTHER

POWER CORD.

DO NOT OPERATE WITH AN EXTENSION CORD.

OPERATING THIS FURNACE ON A CIRCUIT WITH OTHER

FURNACES OR ELECTRICAL APPLIANCES THAT REQUIRE

SIGNIFICANT POWER MAY CAUSE A CIRCUIT BREAKER

TO TRIP.

CAUTION: METAL SURFACE IS HOT DURING OPERATION!

The ProPress SP Accessories Include:

CD: Master Suite Software, Operator's Manual, Furnace Tips

Flash Drive

Quick Start Guide

Cooling Tray

Firing Tray

Press Firing Tray

Ceramic Insert

Power Cord

Temperature Calibration Certiﬁcate

Program Magnet

Quick Cool Barb and Hose

Warranty Registration Card

THE TRIANGULAR BLACK AND YELLOW STICKER ON THE

FRONT CENTER OF THE MUFFLE HOOD IS A WARNING

THAT THE METALLIC SURFACE CAN BECOME HOT TO THE

TOUCH. NEVER PLACE YOUR HAND ON THIS SURFACE

OR LEAN ON THE TOP OF THE HOOD WHEN THE UNIT IS IN

OPERATION.

IMPORTANT: CONTACT YOUR DEALER OR THE FACTORY

FOR COMPLETE INSTRUCTIONS ON CONVERTING THE

FURNACE BETWEEN 115 VAC AND 220 VAC.

HAZARDOUS LIVE VOLTAGE PRESENT; DISCONNECT AC

MAIN POWER CORD BEFORE REMOVING COVER.

1 2 3 ... 34

Comments to this Manuals

No comments

Whip Mix Pro Press 100 Operator's Manual Page 2

Comments to this Manuals

Related products and manuals for Water heaters & boilers Whip Mix Pro Press 100