Whip Mix Pro Press 100 User Manual Page 8
- Page / 8
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Free samples and
special promotions at
www.whipmix.com
Whip Mix Corporation
•
361 Farmington Ave.
•
Louisville, Kentucky
•
40209
800-626-5651
•
502-637-1451
•
Fax: 502-634-4512
Connect with us!
Porcelain and Pressing Furnace Specifications
ProPress SP ProPress 200 Pro 200 FireLite
Power Supply 120 V ± 10% 50/60Hz
220 V ± 10% 50/60Hz
120 V ± 10% 50/60Hz
220 V ± 10% 50/60Hz
120 V ± 10% 50/60Hz
220 V ± 10% 50/60Hz
110 V ± 10% 50/60Hz
220 V ± 10% 50/60 Hz
Power Consumption Furnace Alone: 1,100W
Furnace and Pump: 1,400W
Furnace Alone: 1,100W
Furnace and Pump: 1,400W
Furnace Alone: 1,100W
Furnace and Pump: 1,400W
Furnace Alone: 1,100W
Furnace and Pump: 1,400W
Unit Dimensions 13"W x 18"D x 25"H
(33cm x 46cm x 64cm)
11"W x 16"D x 25"H
(28cm x 40cm x 64cm)
11"W x 16"D x 20.5"H
(28cm x 40cm x 52cm)
13"W x 16.5"D x 20"H
(33cm x 42cm x 51cm)
Temperature 1,200° C (2,200° F) Maximum 1,200° C (2,200° F) Maximum 1,200° C (2,200° F) Maximum 1,200° C (2,190° F) Maximum
Weight 35 kg (77 lbs.) 32 kg (71 lbs.) 27 kg (59 lbs.) 27 kg (59 lbs.)
Number of Programs 200 200 200 50
Muffle Chamber (3-3/4" W x 2-1/2" H x 3-3/4" D)
10 cm x 6 cm x 10 cm
(3-3/4" W x 2-1/2" H x 3-3/4" D)
10 cm x 6 cm x 10 cm
(3-3/4" W x 2-1/2" H x 3-3/4" D)
10 cm x 6 cm x 10 cm
(3.75" x 2.5")
10 cm x 6 cm
Muffle Windings Quartz Tubing Quartz Tubing Quartz Tubing Spiral-wound Quartz Tubing
Sintering Furnace Specifications
Infinity ZR
Electrical Power Requirements 208-230V 50/60Hz Single Phase, 40 Amps 9200W
Overall Dimensions 18"W x 16"D x 29"H (45.7cm x 40.6cm x 73.7cm)
Heating Chamber Dimensions 6.0" W x 8.36"D x 6.0"H (15.24cm x 21.25cm x 15.24cm) (4.93 Litre)
Oven Weight 106 Lbs. (48.0 Kg)
Shipping Weight: 145 Lbs. (65.8 kg)
Maximum Temperature 1550°C (2822°F)
Number of Programs 30
Number of Stages/Program 1-4, User defined.
Delay Start 0 – 4.0 hours
HVAC Load 31,320 BTU/Hour
Heat Rate* 1 – 104°F/min. (1 – 40°C/min.)
Temperature Stage 1,2,3,4: 150°F – 2822°F (66°C – 1550°C)
Hold Time 0 – 4 hours on each Stage
Burnout Furnace Specifications
Infinity M30 Infinity L30 PDQ Digital M PDQ Digital L
Electrical 115V 50/60Hz 1075W
230V 50/60Hz 1280W
115V 50/60Hz 1392W
230V 50/60Hz 1890W
115V 50/60Hz 1075W
230V 50/60Hz 1280W
115V 50/60Hz 1392W
230V 50/60Hz 1890W
Capacity 8–1 3/4" rings or 2–3" rings 15–1 3/4" rings or
5–1 3/4" rings and 3–3" rings
8–1 3/4" rings or 2–3" rings 15–1 3/4" rings or
5–1 3/4" rings and 3–3" rings
Overall Dimensions 10.7"W x 13"D x 15"H
(27.2cm x 33cm x 38cm)
14.4"W x 13"D x 15"H
(36.6cm x 33cm x 38cm)
10.7"W x 13"D x 15"H
(27.2cm x 33cm x 38cm)
14.4"W x 13"D x 15"H
(36.6cm x 33cm x 38cm)
Heating Chamber
Dimensions
5-1/2"W x 5-1/4"D x 5-1/8"H
(14.0cm x 13.3cm x 13.0cm)
9-1/8"W x 5-1/4"D x 5-1/8"H
(23.2cm x 13.3cm x 13.0cm)
5-1/2"W x 5-1/4"D x 5-1/8"H
(14.0cm x 13.3cm x 13.0cm)
9-1/8"W x 5-1/4"D x 5-1/8"H
(23.2cm x 13.3cm x 13.0cm)
Number of Programs 30 30 NA NA
Night Time
(Delay Start)
0 – 99 hours
Note: This is the time required for the program to be completed and ready to cast.
NA
Heat Rate* (Stage 1)
a) 1 – 30°F/min. (1 – 17°C/min.)
b) “FULL” Stage heats at the maximum rate attainable.
(Stages 2, 3 and 4)
a) 1 – 30°F/min. (1 – 17°C/min.)
b) “FULL” Stage heats at the maximum rate attainable.
c) “NO” Stage is not used.
d) “COOL” Stage cools down to the programmed temperature.
Note: If “NO” is selected for a stage, that stage and all subsequent stages will not be used.
The furnace, therefore, can be used for one, two, three or four stage operation.
a) 1 – 30°F/min. (1 – 17°C/min.)
b) “FULL” Stage heats at the maximum rate attainable.
Temperature a) Stage 1: 150°F – 2012°F (66°C – 1100°C)
b) Stages 2, 3 and 4: 100°F – 2012°F (38°C – 1100°C)
150°F – 2012°F (66°C – 1100°C)
Hold Time 0 – 4 hours per stage 0 – 4 hours
NOTE: Will not sinter zirconia.
* Programmable heat rates. Actual heat rate at high temperatures may be lower
depending upon furnace load and electrical voltage.
11/13
© 2020, manymanuals.com. All rights reserved. | 5.280 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals